Injection molding is an important process to produce goods made of plastics. In this process, the polymer granulate is melted and injected into a cooled form. The cyclic injection process consists of the following phases: filling, packing and cooling, plastication, and ejection of the final part. In this work, a model-based optimal control strategy for the filling and packing phase is developed.… Mehr zeigen During the filling phase, the screw is moved forward by means of two hydraulic cylinders, which injects the molten polymer into the form. A non-return valve prevents backflow of the polymer via the barrel. In the packing phase, a certain pressure-profile is applied to the melt to compensate for shrinking of the polymer during the solidification. The control tasks of the two phases can be summarized as follows: In the filling phase, the movement of the screw has to be controlled according to a user-defined velocity trajectory. In general, the velocity profile is given as a function of the current screw position. During the filling phase, the system has to be kept below a certain pressure limit. In the subsequent packing phase, a desired pressure-profile is to be tracked as a function of time. In both phases, all the limits of the drive speed, drive acceleration, and drive torque have to be respected. The controller has to follow the desired trajectories as good as possible while keeping the injection unit within the given limits. This control task is solved by a nonlinear model-predictive control, which allows for an optimal control performance independent of the operating point of the injection unit. The proposed control concept is implemented on a rapid-prototyping platform and experimentally validated on an industrial injection molding machine. Weniger zeigen

Dieses Produkt haben wir gerade leider nicht auf Lager.

ab 29,99 €

Derzeit nicht verfügbar

Handgeprüfte Gebrauchtware

Bis zu 50 % günstiger als neu

Der Umwelt zuliebe

Produktinformationen

Technische Daten

Erscheinungsdatum

15.04.2021

Sprache

Englisch

EAN

9783844079692

Herausgeber

Shaker

Serien- oder Bandtitel

Modellierung und Regelung komplexer dynamischer Systeme

Sonderedition

Nein

Autor

Christoph Fröhlich

Seitenanzahl

123

Auflage

Einbandart

Broschiert

Warnhinweise und Sicherheitsinformationen

Informationen nach EU Data Act

Bewertungen

-.-

★★★★★

☆☆☆☆☆

Leider noch keine Bewertungen

Sicher bei rebuy kaufen

Schreib die erste Bewertung für dieses Produkt!

Wenn du eine Bewertung für dieses Produkt schreibst, hilfst du allen Kund:innen, die noch überlegen, ob sie das Produkt kaufen wollen. Vielen Dank, dass du mitmachst!

Sicher bei rebuy kaufen