Bis zu 50 % günstiger als neu 3 Jahre rebuy Garantie Professionelles Refurbishment

Reduced integration-based continuum finite elements for gradient-extended damage

Derzeit nicht verfügbar

Handgeprüfte Gebrauchtware

Bis zu 50 % günstiger als neu

Der Umwelt zuliebe

Reduced integration-based continuum finite elements for gradient-extended damage

Oliver Barfusz (Broschiert, Englisch)

Keine Bewertungen vorhanden

Optischer Zustand

Beschreibung

Favored by the immense progress in information technology, numerical simulations based on the finite element method have become an indispensable tool in engineering science as well as industry. By using virtual prototypes, time-consuming, large-scale experiments can be reduced to a minimum, resulting in considerable time and cost savings. Furthermore, numerical simulations allow a particularly detailed analysis of processes, which would otherwise only be possible with great difficulty, and therefore contribute decisively to a deeper understanding of mechanical processes. The quality and thus the validity of simulation results strongly depends on the underlying mathematical models. On the one hand, this concerns the employed material models, which are constantly being further developed in order to be able to represent even the most complex mechanical effects and phenomena. At this point, for example, the (mesh-independent) description of ductile damage and failure processes should be mentioned, which represents a part of the focus of this dissertation. On the other hand, the choice of the finite element formulation plays a decisive role. Due to their simplicity, robustness and efficiency, element formulations based on low-order shape functions are preferred. However, it is known that such formulations behave much too stiffly, for example, in the case of bending dominated deformations as well as in the case of nearly incompressible materials, thus distorting the quality of the simulation results. Therefore, the main goal of the research field of finite element technology is to address these stiffening (locking) effects of low polynomial order elements in order to allow the most versatile use of the respective formulation. This cumulative dissertation aims to make a valuable contribution in this regard. It consists essentially of three peer-reviewed journal articles in the subject area already published by the author (and his co-authors). Herein, the main goal is to extend a class of low-order continuum elements, which are based on the technology of reduced integration with hourglass stabilization, to the analysis of gradient-extended damage. In this context, gradient-extended damage is used to address the pathological mesh dependence in finite element simulations in the presence of softening material behavior. After an introductory part, which outlines the motivation, the research relevant topics and a comprehensive literature review on the state of the art, the thesis starts with a work on a novel continuum element formulation for gradient-extended damage for large deformations. The essential goal of this work is to provide an accurate and particularly efficient finite element technology that is as generally applicable as possible for the prediction of damage phenomena in solids. The numerical efficiency results from the fact that only a single integration point is used at the center of the element. Since there is a remarkable analogy between the micromorphic balance equation and the steady-state heat equation, a similar derivation of a consistent hourglass stabilization is adopted from the thermomechanically fully coupled situation, which has already been studied by members of the author’s work group. Here, the Taylor series expansion of all constitutively dependent quantities plays a crucial role. The performance of the novel single Gaussian point formulation is demonstrated by means of four representative structural examples with softening. The simulations show that the proposed stabilization scheme works reliably for the present multi-field problem. Compared to conventional low-order solid elements with eight integration points, the novel formulation is computationally much more efficient and less sensitive to mesh distortions, which especially improves robustness in regions with highly localized damage. The two subsequent articles deal with the incorporation of gradient-extended damage into reduced integration-based continuum shell elements (solid-shells). They differ essentially in the underlying kinematic assumptions (geometrically linear and non-linear theory, respectively). The crucial goal of these works is to extend the gradient-extended damage analysis to thin-walled structures. In contrast to the single Gaussian point formulation of Article 1, the assumed natural strain (ANS) method is applied to address curvature thickness locking as well as the transverse shear locking. Reduced integration is performed in the shell plane only and multiple integration points are considered in the direction of the shell thickness coordinate to capture potential material non-linearities in that direction. For this purpose, a combined Taylor series expansion of the strain-like quantities with respect to the element center and the stress-like quantities with respect to the normal through the element center is utilized, resulting in an appropriate hourglass stabilization. The finite element formulations are extensively tested in several rather complex plate and shell problems, including both brittle and ductile damage up to ultimate failure. The simulation results demonstrate the excellent performance of the gradient-enhanced solid-shells. Weniger zeigen

Dieses Produkt haben wir gerade leider nicht auf Lager.

ab 39,99 €

Derzeit nicht verfügbar

Handgeprüfte Gebrauchtware

Bis zu 50 % günstiger als neu

Der Umwelt zuliebe

Produktinformationen

Technische Daten

Erscheinungsdatum

08.06.2022

Sprache

Englisch

EAN

9783844086041

Herausgeber

Shaker

Serien- oder Bandtitel

Applied Mechanics - RWTH Aachen University

Sonderedition

Nein

Autor

Oliver Barfusz

Seitenanzahl

201

Auflage

Einbandart

Broschiert

Warnhinweise und Sicherheitsinformationen

Informationen nach EU Data Act

Bewertungen

-.-

Leider noch keine Bewertungen

Sicher bei rebuy kaufen

Sehr Gut, 4.52/5.00

Aus 200.000+ Bewertungen

Schreib die erste Bewertung für dieses Produkt!

Wenn du eine Bewertung für dieses Produkt schreibst, hilfst du allen Kund:innen, die noch überlegen, ob sie das Produkt kaufen wollen. Vielen Dank, dass du mitmachst!